Audits

We are working closely with regulators, retailers and installers to create a safer solar industry through rigorous safety and quality standards and our audit program.

Authorised solar and hot water retailers and installers can learn about our commitment to safety and quality through our audit program below.

Our audits are helping to ensure that installations in the Solar Homes Program are safe. Audits drive continuous improvement in the solar and hot water industries and make sure installation problems are dealt with promptly.

Authorised retailers or installers who are found to be doing the wrong thing, resulting in non-compliant and unsafe installations, may be excluded from the Solar Homes Program.

Purpose of the audit program

The purpose of the audit program is to identify areas across the solar and hot water industries that need improvement and to ensure the safety and quality of systems and installations.

Auditors will look at the quality of the work and whether there are issues that need to be followed up with the authorised retailer.

Audits provide a valuable picture of the standard of work being delivered under the Solar Homes Program, with feedback provided to the solar or hot water industry for further action or improvement.

Steps in the audit process

The audit process involves the following steps.

Step one: Selecting sites to audit

At this step Solar Victoria selects the audit sites, aiming to inspect a sample of five percent of all Solar Homes Program installations. This may happen three to six months after installation. We sometimes also conduct audits more rapidly, as soon as a few weeks after installation.

We are committed to auditing a range of installations across the state. In selecting an audit site, we may consider a retailer’s performance, industry experience, compliance history and system price.

Step two: Conducting the audit

At this step an independent auditor inspects solar PV, solar battery and hot water installations. Solar Victoria has engaged TechSafe Australia as the independent auditor for the Solar Homes and Solar for Business programs.

If selected, a representative from TechSafe contacts the homeowner to arrange a suitable time for the inspection. We also email the homeowner to let them know about the audit.

Auditors for the Solar Homes Program look at a range of matters including:

  • Electrical safety: Check of conduit placement, ingress protection, fuses, location, quality of DC isolators and the application of safety warning labels.
  • Equipment: Ensure PV modules, inverters, batteries and hot water products are on our products lists and are installed to ensure manufacturer's warranties are intact.
  • System design and functionality: Making sure solar systems have been designed appropriately, for example, with correct sizing, aspect and shading tolerances, and are operating as expected.
  • Documentation and credentials: Check of installers' accreditations and licences and required installation documentation sighted.

They use checklists developed in collaboration with external stakeholders and Solar Victoria to ensure the quality and safety of the systems for the audits.

These documents include all questions auditors base their inspection of solar PV, hot water and solar battery installations on, using the current audit checklists:

Download the Solar Homes PV audit checklist 3.3
Word 406.75 KB
(opens in a new window)
Download the Solar Homes battery audit checklist 1.5
Word 386.93 KB
(opens in a new window)
Download the Solar Homes hot water audit checklist
Word 385.27 KB
(opens in a new window)

Step three: Reporting on the draft audit findings

At this step the independent auditor documents preliminary or draft audit findings and seeks feedback from the retailer and installer (within 14 days).

Unless you are challenging the draft report findings, our expectation is that you start work on rectifying any items noted as “needs rectification” from the time you receive the draft report.

The homeowner will also be informed and advised of any next steps if required by the authorised retailer (or appointed installer).

Step four: Reporting on the final audit findings

At this step the independent auditor confirms audit findings and sends the final report to Solar Victoria. We will then send the final report to the retailer and installer for the audited installation.

If improvements are identified or the installation is found to be adequate, the retailer and installer do not need to take any further steps. These findings mean the system is compliant and has been installed satisfactorily. We do, however, encourage retailers and installers to action the information and guidance provided where improvements have been identified.

Step five: Rectifications needed

At this step Solar Victoria sends a rectification notice to the retailer via the Solar Victoria portal. Rectifications are needed if the auditor rates the installation as “unsafe” or “needs rectification”. This notice provides 30 days for the retailer to rectify identified issues.

The retailer will be given information about:

The retailer must contact the customer within seven days to arrange a time to complete any rectification works.

We will then review the provided evidence and change the job status to rectification complete.

Step six: Rectifications completed

At this step the retailer advises Solar Victoria that all rectification work is complete (within 30 days) and uploads evidence of satisfactory rectification works to the Solar Victoria portal.

We will then review the provided evidence and change the job status to rectification complete.

If we have any follow-up questions, we will change the status of the audit to Additional information required and will contact the retailer.

Step seven: Performance reporting

At this step Solar Victoria aggregates audit data and advises the retailer of their performance and any actions they will need to take to improve future performance.

If audit findings are unacceptable, Solar Victoria can make decisions about whether individuals or companies may continue to take part in the Solar Homes or Solar for Business programs.

Audit committee

Some issues will be considered by an audit safety committee. The committee includes members from Solar Victoria, WorkSafe Victoria, Energy Safe Victoria, the Victorian Building Authority, Consumer Affairs Victoria and the Clean Energy Council.

This group will consider any action already taken by individual agencies and determine whether the matter needs to be referred to the Clean Energy Council or Solar Victoria for further action.

Others notified of unsafe installations

If a solar, battery or hot water installation is found to be unsafe, or has major non-compliance issues that require rectification, we will inform Energy Safe Victoria, the Clean Energy Regulator, the Clean Energy Council and the Victorian Building Authority.

If non-compliance issues are found with solar, battery, hot water installations, we will notify the Energy Safe Victoria, Clean Energy Council and/or the Victorian Building Authority regarding enforcement and rectification.

Other checks on installations

In addition to the Solar Homes Program audits, other safety checks include:

  • Electrical inspection - every system is required to be checked by a licensed electrical inspector and a Certificate of Electrical Safety (CES) issued prior to the system being connected to the distribution network.
  • Plumber certificate - a licensed plumber is required to lodge a compliance certificate with the Victorian Building Authority within five days of completing any of the following work
  • Safety visits - as part of the solar rebates process, we have asked householders to register for safety visits by WorkSafe Victoria during installation. These safety visits will focus on worker safety during installation, such as working at heights.
  • Clean Energy Regulator audits - as part of a national program of inspections, the Clean Energy Regulator also performs selected audits 12 to 18 months after installation.

How to provide feedback on audits

We welcome your feedback. Authorised retailers and installers whose installations have undergone an audit should first provide feedback or raise any concerns with the auditor through TechSafe Australia at solarhomes@techsafe.com.au.

Please email Solar Victoria at quality.assurance@team.solar.vic.gov.au if:

  • your concerns can't be resolved with the auditor
  • you would like to escalate this to our panel of technical experts to consider your feedback on an audit item.

Updated

Sign up to our industry newsletter

Sign up for updates on new initiatives, training, safety and compliance plus more - for retailers, installers and other workers.